Senior Manufacturing Engineer

Publiceringsdatum: 2025-10-08

Letar du efter möjligheter att arbeta inom yrken med teknisk inriktning? Ett spännande jobb som civilingenjör, tillverkningsindustri hos Lyten Ett AB väntar på dig - varför inte söka idag? Lyten Ett AB söker för närvarande efter personal på heltid för en tjänst tills vidare. Kolla in deras jobbannons för mer information.

Skellefteå är platsen där detta jobb har sin tjänsteort. Om du tycker att det låter intressant att börja jobba hos Lyten Ett AB i rollen som civilingenjör, tillverkningsindustri så har de just nu tre lediga tjänster som skulle kunna vara en perfekt match för dig! Har du vad som krävs för att arbeta som civilingenjör, tillverkningsindustri hos Lyten Ett AB? Ansök innan onsdag den trettioförsta december 2025 och ta reda på det!

Jobbannons

Job Scope

High level purpose of function.

The Senior Manufacturing Engineer plays a key role in process equipment commissioning, production ramp-up, and full-scale manufacturing within a battery cell production facility. They ensure smooth start-up of production lines, optimize manufacturing processes, and lead continuous improvement initiatives to maximize process yield, equipment availability, and overall production performance. This role combines hands-on equipment commissioning experience, cross-functional collaboration, and technical expertise to deliver safe, efficient, and high-quality battery cell production. The manufacturing engineer is responsible for all aspects of their process machine including technical functionality, how personnel interact with it, what maintenance activities are recommended and what crucial spares are required.

Key Responsibilities

Overall areas of responsibilities and activities

· Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards.

· Promote a culture of safety, quality, and operational excellence throughout production and commissioning activities.

· Lead process equipment commissioning, including cold and hot commissioning on-site during start-up or restart projects. (Project timeline dependent)

· Facilitate smooth transitions from commissioning to production ramp-up and full-scale manufacturing. (Project timeline dependent)

· Translate lessons learned into design and process improvements for future expansions.

· Monitor, analyze and improve production KPIs, including yield, availability, and performance. Identifying top losses, production bottlenecks, and performance gaps to drive corrective actions and continuous improvement initiatives.

· Lead root cause analysis (RCA) for equipment-related losses, minor stops, and process deviations.

· Define, release, and maintain manufacturing process standards and operator training programs.

· Train and mentor new engineers, operators and other support functions.

· Prepare, review, and approve documentation including (but not limited to); WI, PFMEAs, commissioning checklists, project timelines, A3s.

· Provide technical feedback and guidance to suppliers to ensure equipment quality, compliance with specifications, and CE standards.

· Develop and issue DOEs (Design of Experiments) and schedule process and equipment trials onsite and at supplier sites (if required).

· Deliver a line capable of obtaining PPAP approval, following a structured quality gate model.

· The role requires regular presence on the production floor, with a minimum of approximately 50% of working hours spent on-site. Depending on project needs, there may be periods where up to 100% of working hours are required on the shop floor.

· Complete supplementary tasks as seen fit by management to effectively utilize time and resource for the benefit of the business.

Accountability/Authorization

Budget responsibility: No

Direct reports: No

Work environment responsibility: No

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

· Bachelor's or master's degree in mechanical, electrical, or chemical engineering.

· Minimum of 3 years of relevant work experience in production, equipment, or engineering-related roles.

· Proven track record of leading manufacturing process improvements and production optimization in a factory environment following recognised project management techniques.

· Experience in building and scaling production in a fast-growing environment, ideally within the battery, food, pharma, paper & pulp, semiconductor, electrochemical, or similar industries.

· Strong technical curiosity, analytical mindset, and business-oriented problem-solving skills.

· Hands-on experience and interest in equipment commissioning, troubleshooting, and optimisation.

· Proficient in detailed root cause analysis and structured problem-solving methodologies.

· Familiarity with quality assurance troubleshooting tools.

· Experience working to industry standards obtaining certification including (ISO, IATF &VDA)

· Knowledge of OEE (Overall Equipment Effectiveness) metrics and their application in production environments.

· Experience with statistical process control and process capability analysis

· Knowledge of lean manufacturing principles and six sigma methodologies

Specific skills

· Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems.

· Troubleshooting skills with diagnostic equipment.

· Experienced in continuous improvement and root cause analysis.

· Ability to document technical problems concisely.

· Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams.

· Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE.

· Comfortable operating in high-profile, international, and high-pressure environments.

· A genuine technical interest and passion about working within production is highly valued.

Personal success factors

· Very strong safety mindset.

· High work ethic, critical thinking, and strong problem-solving skills are a must.

· The ability to work under high pressure and tight deadlines with excellent time management is required.

· Detail-oriented, highly organized, and result-driven.

· Proactive with a 'can-do' entrepreneurial spirit.

· Communicative, team-oriented, and service-minded.

· Ability to work under pressure and tight deadlines.

· Strong cultural awareness and adaptability to an international environment.

· Resilient, motivated, and open to continuous learning.