Electromechanical Technician for Normal Conducting Magnets

Publiceringsdatum: 2026-03-30

Är du intresserad av att jobba inom yrken med teknisk inriktning? Här är din möjlighet att bli en del av teamet hos CERN genom att arbeta som installationsingenjör. Detta är ett jobb på heltid där CERN letar efter någon under 6 månader eller längre.

För detta jobb är ospecificerad arbetsort den angivna tjänsteorten. CERN söker för närvarande efter en person att anställa inom installationsingenjör-branschen. Ta en titt på deras lediga tjänst för att se om något av dem passar just dig. CERN letar efter erfaren installationsingenjör som kan ansluta till deras team. Sista ansökningsdag är måndag den tjugosjunde april 2026.

Jobbannons

What you'll do:

Are you ready to work hands-on with the magnets that keep CERN's accelerators running?

The Magnets, Superconductors and Cryostats (MSC) group of the Technology Department (TE) designs, onstructs and measures the superconducting and normal conducting magnets for the CERN accelerator complex. The group is also in charge of integrating magnets into the CERN accelerator complex, designing and procuring magnet cryostats and performing magnet quality control. In addition, it provides operational support for magnets, magnet performance and related devices such as current leads.

Within MSC, the Normal Conducting Magnets (NCM) section is responsible for the design, construction, ommissioning, maintenance, and upgrade of the normal conducting magnets for present and future CERN accelerators and beam lines.

This is your chance to join a collaborative, international team, work with unique technologies, and contribute directly to the reliable performance of the world's largest accelerator complex.

Your responsibilities:

• Participate in the refurbishment, manufacture and testing of normal conducting magnets in CERN workshops including the compilation of related quality control documents.
• Carry out preventive and corrective maintenance interventions on normal conducting magnets installed in the CERN accelerator complex.
• Contribute to the design, development, and procurement of dedicated tools, equipment and components required for both refurbishment activities and the production of new normal conducting magnets.

Still here?

Let's make a quick check about:

Your profile:

• Manufacture and assembly of electromechanical devices.
• Carrying out corrective and preventive maintenance of electromechanical devices.
• Reading and understanding of mechanical and electrical drawings.
• Experience in conventional mechanical machining.
• Experience with TIG / MIG welding, and ideally brazing techniques.
• Experience in mechanical and / or electrical measurements.
• Technical certificate or general secondary education or equivalent relevant experience in the field of Electromechanical Engineering or a related field.

Your skills:

• Construction, test and installation of electromechanical equipment and systems:.
• Operation and maintenance of electromechanical equipment and systems.
• Assembly of mechanical structures and equipment.
• Knowledge and application of joining techniques: welding, brazing, soldering.
• Contributes to promoting a positive atmosphere in the team through an optimistic and constructive attitude; addresses issues.
• Works conscientiously and reliably; delivers on promises.
• Has a structured and organised approach towards work; is able to set priorities and plan tasks with results in mind.
• Readily accepts new tasks or work/projects.
• Spoken and written English or French, with a commitment to learn the other language.

Medical hazard:

• Operations on electrical installations or in their vicinity (> 1000 Volt AC or 1500 Volt DC) requiring a specific authorisation.
• Exposure to electromagnetic fields under certain exposure conditions.
• Use of certain mobile work equipment or equipment used for lifting loads (lifting equipment, bridge cranes, aerial work platforms, etc.) requiring a driving authorisation.

Given the occupational health risks associated with this position, the selected candidate must obtain medical clearance before a contract offer is confirmed.

Employment conditions:

• A valid driving licence.
• Stand-by duty, when required by the needs of the Organisation.
• Interventions in underground installations.
• Work in Radiation Areas.

Be sure to meet the eligibility criteria:

• You are a national of a CERN Member State or Associate Member State. Currently, we cannot consider applications from Pakistani and Lithuanian nationals for positions with a 2026 start date, as the ceiling defined under Article II.5 of the Associate Membership Agreement has been reached.
• You have relevant qualifications and professional experience.
• If you have previously held a Staff contract at CERN, you will not be eligible for these positions.
• Please pay attention to the additional criteria and requirements for this specific position and mentioned above.

You will need these documents to complete your application:

• Your CV (English or French)
• Any document you consider relevant to your application