Master Thesis: Valorization of pyrolysis gas mixtures from Biochar producti

Publiceringsdatum: 2025-08-15

Skulle du vilja jobba inom yrken med teknisk inriktning? Det är nu möjligt för dig att få jobb som civilingenjör, process, kemiteknik hos SWERIM AB. Om du vill arbeta heltid hos SWERIM AB, har de just nu en tjänst tills vidare som kan passa dig.

Arbetsplatsen ligger nära tillhands om du är bosatta i Luleå som är tjänsteorten. SWERIM AB har just nu ett ledigt jobb som civilingenjör, process, kemiteknik. Har du vad som krävs för att arbeta som civilingenjör, process, kemiteknik hos SWERIM AB? Ansök innan söndag den fjortonde september 2025 och ta reda på det!

Jobbannons

We want to be more! The research institute Swerim conducts needs-based industrial research and development concerning metals and their route from raw material to finished product. Swerim has 200 co-workers in two locations in Sweden - Luleå and Stockholm. Our vision is a fossil-free and circular industry.

Biochar plays a key role in many industrial sectors for replacing fossil fuel such as coal and coke.  Metallurgy, soli enrichment, printing, graphite are few industries moving towards biochar to mitigate Green House Gas (GHG) emissions. Pyrolysis gases are produced during the process of Biochar production. Pyrolysis gas is a mixture of carbon monoxide, hydrogen, carbon monoxide, methane, etc.

This project aims to valorize two pyrolysis gas mixtures originating from Biochar process and find the best synergies between Biochar process and byproducts.   

Project overview:

Goal of the study 

The goal of the study is to identify the best product/products out of pyrolysis gas mixture with the highest benefit of technical, environmental, economic and societal perspectives. Process flow modeling using Aspen plus or other open-source process modeling software will be used for assessing different chemical products such as methane, ammonia, etc.

Qualifications

A student in Chemical Engineering, Process Engineering or Energy Engineering. Process Modeling experience would be beneficial.

Project time

The project is intended for a master thesis (30hp). The start date is August/September 2025 or can be mutually decided through negotiations.

Further information

This project is intended to be performed at Swerim in Luleå. Swerim rewards the student with 50 000 SEK for an approved master thesis (30hp).

Contacts

You are welcome to contact Thamali Jayawickrama, thamali.jayawickrama@swerim.se if you have any questions about the project.

Application

Apply by using the application function below. The application can be written in English or Swedish. You will receive a confirmation that Swerim has received your application. Please note that we fill the position as soon as we find a suitable applicant, which means we can fill the position before the deadline

.